Vertical Needle Feet

Adjustable Seam Guide

Conventional style zipper and cording foot, all metal, adjustable.

Beading Snap-on Foot

Blind Hem Guide (metal)

Transparent, off-set bottom, snap-on.

Heavy duty ridged all metal screw-on foot, holds button in place when sewing on button with a zig-zag stitch

Transparent and grooved-out on underside for the 4-step built-in buttonhole system.

Plastic sliding buttonhole foot, snap-on. For machines with 4-step buttonholer.

For sewing hard-to-feed fabric, also excellant for plaids, stripes, top stitching and quilting.

For vertical low presser foot. Heavy-duty metal ankle with transparent foot for darning, quilting, embroidery, monograming etc. Allowes the operator to move the work freely while stabilizing the fabric. Works by mounting in place of the regular pressure foot with a fork wrapped around the needle clamp screw for a spring movement.

3/16" (4mm) hemmer foot. Creates a rolled hem by rolling the edge of the fabric down and under as it stitches.

"Little Foot" screw-on Great for quilters. Right edge 1/4" from center needle position for accurate 1/4" seam allowance: left edge 1/8" from center needle position. Perfect for machine piecing.

More popular open toe for more visibility. Transparent and grooved-out on the under side for decorative applique, zig-zag and embroidery sewing

Use for over casting the edge of fabric. Has a small bar to help stablize the edge of the fabric.. Note: must set zig-zag width wider than bar. (no guarantee for breakage)

Metal foot with 1/4" and 1/8" seam allowance.

Roller Foot

This attachment offers a simple and effective way to make gathered and pleated ruffles. Ruffles may be made seperately or made and applied at the same time. The ruffler is attached to the machine in place of the regular presser foot and is used with a straight stitch setting only. For ruffling, pleating and gathering.

1/4" quilting foot with black guide on right toe for top stitching and edge stitching. Quilters use it to guide seams as they piece quilt blocks. Place edge of fabric blocks against flange guide and stitch. For all low vertical machines with center needle position

Fits Singer model 6416, 6423 with one step built in button hole system. Insert desired button into foot for buttonhole size. Consult your manaul for complete instructions

Fits Singer Model 6408, 6412 with one-step built-in button hole system. Insert desired button into foot for buttonhole size. Consult your manaul for complete instructions.

Fits Singer model 2210 electronic with built-in button hole system. Consult your manaual for complete instructions

Transparent and grooved-out on the under side for decorative applique, zig-zag and embroidery sewing.

Straight Stitch Snap-on Foot.

Snap-on shank for vertical needle feet.

4mm zig-zag snap-on foot.

For new style machines with extra wide zig-zag (6mm). Has side thread entry.

Snap-on left or right of foot. Is used for inserting zippers and stitching corded seams.