Attaching attachments

Attaching attachments



ATTACHING THE EVEN FEED FOOT, FREE MOTION/DARNING FOOT,

BUTTONHOLER, RUFFLER, ZIG-ZAG ATTACHMENT

and OTHER ATTACHMENTS

WHICH ARE ACTIVATED BY THE NEEDLE BAR CLAMP/SCREW.





Read ALL instructions before attaching:





(1.) Remove existing presser foot and shank.



(2.) With the presser bar/lifter in the highest position guide the attachment into position from the rear of the machine.



(3.) Align the presser bar clamp (blue) of the attachment to the presser foot bar, at the same time position the attachment fork (green) so it straddles the needle clamp screw (pink).

NOTE: Some machines may require a different/or longer needle clamp screw.



(4.) Now secure the presser foot attaching screw (yellow).





NOTE: You may find it advantageous to remove the needle while aligning the attachment.